High speed multi-core cable cutting different length and stripping machine

High speed multi-core cable cutting different length and stripping machine

Intro:

This machine is suitable for cutting and stripping inner wires of multi-core cable . It can cut wires to different length, and strip the insulation.

Also it can be customized to strip the outer jacket first.

Machine video:

https://youtube.com/shorts/WRLwRDK_2iU?feature=share

https://youtube.com/shorts/8UM3KFRJS5I?feature=share

Parameters:

Technical Parameters
Model: RS-370CD
Volume: 900*500*1360mm
Copper wire peeling length: 5-15mm (no insulation can be left below 5mm)
Power supply: AC220V50HZ
Air pressure: 5-7KG
Applicable core area: 0.5-3.0 square
Cut length size: each line can be individually adjusted 20-290MM

Features:

1. The length of the copper wire below 5 mm cannot leave rubber
2. Because the length needs to be cut, the length of the rubber left on the machine is different from that of the ordinary peeling machine. The length of the remaining rubber is equal to the length of the peel minus the length of the half-peel. For example, if the length of the peel is 6 mm, it needs to be half-peeled 3 mm to pull the rubber. The length of the remaining rubber is 6-3 mm = 3 mm
3. The minimum drop of every two lines must be greater than, (minimum equal to) the length of the copper wire that needs to be stripped, for example, leave 20MM for one line and 25MM for the other line, then leave 20MM for this line to strip the copper wire. more than 5mm